Categories
Socket 38mm (1-1/2")
Socket (38 mm) for use on our basic wheel tools BJA-33, ...
X Extension 100mm 3/4 drive
German Made 100mm extension in Chrom Vanadium.
License plate light unit, Iso Rivolta GT. T74-80
This is a complete, close to perfect NOS license plate ...
Gas cap - series I
Iso gas cap, very low stock - either NOS or new - like new. ...
Grommet, fuel tank filler neck T69-22
Grommet between gas tank filler tube and body.
Seal, door light - Carello
The rubber seal that protects the door lights in most Iso, ...
Brake hose, front T65-25
OEM quality front brake hose for Iso, ATS, Monteverdi and ...
Pedal Pad - Factory correct Iso parts
Correct reproductions of the Iso Rivolta brake and clutch ...
Tie rod, Right hand
One OEM tie rod as used in Iso, Bizzarrini, ATS and ...
Tie rod, Left hand
One OEM tie rod as used in Iso, Bizzarrini, ATS and ...
Brake hose, rear T56-30
OEM quality rear brake hose for Iso, ATS, Monteverdi and ...
_150x150.jpg)
Bushing, rear control arm, T56-2
Control and reaction arm bushing for Iso, Bizzarrini, ATS ...
Bumper, rear axle
Upper rear axle stop bumper for Iso, Bizzarrini and ...
Bumper, rear axle inside spring. T56-13
NOS; factory original, OEM quality and Italian made inside ...
_150x150.jpg)
Bushing kit, sway bar end link. T55-9
Correct reproduction of the front sway bar bushings, outer ...
Sway bar end link washer, front, outer
Front sway bar end link washer, outer mounting positions. ...
Bushing, sway bar, center front. T55-14
Front sway bar bushing, center mounting positions. Two ...
Bushing, lower shock mounting
The (lower) mounting bushing for shock absorbers like Koni, ...
Insulator, coil spring front T54-65
The correct; steel inserted insulators for the front ...
_150x150.jpg)
Ball joint, lower.
One lower ball joint as was used in all Iso's, Bizzarrini, ...
Bumper, front suspension stop, upper T54-4
Lower front suspension stop bumper for Iso, Bizzarrini and ...
Shim set, lower front suspension T54-34
Specialty made suspension shims for Iso, Bizzarrini, ATS, ...
Bushing, front suspension, lower T54-33
Lower front suspension bushing for Iso, Bizzarrini and ...
Bumper, front suspension
Upper front suspension stop bumper for Iso, Bizzarrini and ...
Ball joint, upper.
One upper ball joint as was used in all Iso's, Bizzarrini, ...
_150x150.jpg)
Bumper, front suspension stop, upper conical. T54-2
The correct conical upper stop for Iso, Bizzarrini and ...
Shim set, upper front suspension T54-17
Specialty made suspension shims for Iso, Bizzarrini, ATS, ...
Bushing, front suspension, upper T54-15
Upper front suspension bushing for Iso, Bizzarrini and ...
Switch board, Iso Grifo
Iso Grifo switch board - exact reproduction made in ...
X Extendable ratchet.
Specialty engineered German made 2-piece ratchet with ...
Door limit strap, Grifo
OEM door limit strap as used on early Grifos.
Door wiring conduit Grifo
OEM door wiring conduit as used in Iso vehicles.
LOT64
Specialty cast aluminum tool for Lotus 8-point central lock ...
Owner's manual, Isorivolta Lele
Iso Rivolta Lele owner's manual, exact reproductions.
Taillight ass'y, Lele USA RH
New Old Stock Carello (RH) taillight unit for Iso Lele in ...
Taillight ass'y, Lele USA LH
New Old Stock Carello (LH) taillight unit for Iso Lele in ...
Indicator light ass'y, Lele (USA) Front RH
New Old Stock Carello (RH) indicator light for Lele in ...
Indicator light ass'y, Lele (USA) Front LH
New Old Stock Carello (LH) indicator light for Lele in USA ...
Indicator light ass'y, Lele (EU) Front, RH
New Old Stock Carello (RH ONLY!!) indicator light for Lele ...
Indicator light ass'y, Lele (EU) Front LH
New Old Stock Carello (LH) indicator light for Lele in ...
JAZ53S
High Quality tool for Jaguar, Daimler, Sunbeam and Panther ...
JAB52
Specialty High Quality composite tool for bent three eared ...
FMB85
Specialty tool for mainly Borrani (Ferrari and Maserati and ...
FMB75
Specialty tool for errari and Maserati and others Series 75 ...
_150x150.jpg)
FMB65
Specialty tool for mainly Borrani (Ferrari and Maserati and ...
FMB42
Specialty High Quality composite tool for Series 42 (133mm ...
FMB32-3
Specialty tool for straight eared Series 32 (123mm center ...
Mount, Engine Chevrolet
The engine (side) mount for small block Chevrolet engines ...
COV3
Specialty High Quality composite tool for 1963 through 1967 ...
